Parts from the people who made the tree

Christmas Tree Replacement Parts

Power adapters, replacement bulbs, light strands, tree stands and eye bolts for Puleo artificial Christmas trees. A tree with one missing part is still a good tree.

Find the part by matching what you already have: the model number on your old adapter, the base and voltage of your bulbs, or the size of your tree's center pole.

Since 1954Parts from the tree's maker
Model no.Match it on your old adapter
Pole sizeMatch it to the stand's hole

Find your part

Four kinds of part, four ways to match

Start with the part that stopped working, then match it to the listing before you order.

Shop all replacement stands →
TS-5.9V2A

Power adapters

Match the model number printed on your old adapter, then compare its plug with the second photo on the listing.

Shop power adapters →
Clear UL Light Strand

Bulbs and strands

Replacement bulbs and 100-bulb light strands for pre-lit Puleo trees. Compare your bulb's base with the listing photo.

Shop bulbs and strands →
7-7.5' Metal Tree Stand

Tree stands

Metal, plastic and revolving stands, each listed with the tree height it suits and the hole size for the center pole.

Shop tree stands →
Set of 3 Replacement Eye Bolts

Eye bolts

A set of 3 standard-size eye bolts for metal Christmas tree stands, the screws that hold the pole in place.

Shop the eye bolts →
How to spot a problem bulb: a normal bulb beside bulbs with a bent wire, a missing wire and a burned out filament

Match it first

How to match the right part

Every part here is listed by the detail that decides whether it fits. Check that detail on the part you have, then on the listing.

  • Power adapterMatch the model number, the output volts and amps, and the plug shape in the listing's second photo.
  • Light bulbsMatch the bulb base to the listing photo and the voltage. Our replacement strands list 2.5-volt bulbs.
  • Surelit treesThe clear Surelit strand is listed for trees from 2016 and newer. Compare the bulb base before you order.
  • Tree standMeasure your center pole and match the hole size. See replacement stands.
TS-5.9V2A

By model number

The TS-5.9V2A Adapter

A replacement adapter with an output of 5.9V and 2.0A.

Its listing gives an input of 120V, 60Hz, 0.25A. Before you order, check the model number on your old adapter and compare your tree's plug with the second photo on the listing, so the connection matches.

Multi Color Light Strand

Bulbs on a strand

The Multi Color Light Strand

100 multicolor bulbs, for replacing bulbs on a pre-lit Puleo tree.

Replace a bulb with one of the same size and the same voltage rating, which the listing gives as 2.5 volts. Unplug the strand first, compare the base with the listing photo, and seat each bulb fully in its socket.

Surelit Light Strand: Clear/Green

For Surelit trees

The Surelit Light Strand

100 clear Surelit bulbs on a green cord, listed for trees from 2016 and newer.

For multicolor Surelit trees there is also a 25-pack of multicolor bulbs with green bases. Both list 2.5-volt bulbs, and both ask you to compare your bulb's base with the photo first.

Set of 3 Replacement Eye Bolts

Stand repair

The Set of 3 Eye Bolts

Three standard-size eye bolts for metal Christmas tree stands.

Most of our metal stands use 3 eye bolts to hold the tree's pole in place. If one goes missing in storage, a new set brings the stand back into use without replacing the whole base.

TS-5.9V2A

By model number

The TS-5.9V2A Adapter

A replacement adapter with an output of 5.9V and 2.0A.

Its listing gives an input of 120V, 60Hz, 0.25A. Before you order, check the model number on your old adapter and compare your tree's plug with the second photo on the listing, so the connection matches.

‹›

Made by Puleo

Four generations of Christmas trees

Everything on this page is made by Puleo International, a family manufacturer building artificial Christmas trees since 1954. We sell them to you directly, and the parts stay with the trees: replacement stands and spare parts are sold right here.

1954Founded
4thGeneration
NJSouth Plainfield

Buying guide

How to find the right replacement part

Four steps, from naming the part to fitting it: identify it, read or measure it, match it to a listing, then fit it.

Read the full replacement parts guide →
  1. Identify the part

    Start with what stopped working. If a tree that plugs in through an adapter will not light at all, check the adapter against our power adapters. A single dark or damaged bulb points to replacement bulbs or a light strand. A tree that leans or wobbles points to the stand, or to an eye bolt that went missing in storage. Knowing which part it is narrows the search to one section.

  2. Read the label or measure

    Most parts carry the detail you need. An adapter has its model number and output printed on it, in volts and amps. A bulb has a base shape you can compare with a photo. A stand is defined by the diameter of the hole the pole sits in, so measure your tree's center pole where it enters the stand, and note the tree's height. Write these down before you start looking.

  3. Match it to a listing

    Each listing names the detail that decides the fit. Adapter listings give the model, the input and the output, and most show the plug in their second photo. Our replacement strands list 2.5-volt bulbs, and the clear Surelit strand is listed for trees from 2016 and newer. Replacement stands run from a 3/4 in. hole for 3 ft trees to 1 5/8 in. for 12 ft trees.

  4. Fit it with the tree unplugged

    Unplug the tree before you change any part. Compare the new adapter's plug with your tree's connector before you connect it, seat each new bulb fully in its socket as the strand listings ask, and follow the instructions supplied with a stand when you fit it or its eye bolts. Then plug the tree back in and check that every section lights.

FAQs: Christmas Tree Replacement Parts

How do I find the right replacement part for my tree?

Match the part to what you already have. For a power adapter, read the model number printed on the old one. For bulbs, compare the base with the listing photo and match the voltage. For a stand, measure your tree's center pole and match it to the hole size on the listing. Each listing names the detail that decides the fit, so check it before you order.

How do I choose a replacement power adapter?

Start with the model number on your old adapter and look for the same model in our power adapters. Each listing gives the input and output, in volts and amps, and most ask you to compare your plug with the second photo, because the connector has to match too. If the model number has worn off, the output figures printed on the adapter are the next thing to match.

Do you sell a 5.9V 2A power adapter?

Yes. The TS-5.9V2A is a replacement adapter with an output of 5.9V and 2.0A, and an input of 120V, 60Hz, 0.25A. Check that the model number matches your old adapter, and compare the plug with the second photo on the listing before you order, so you know the connection fits your tree.

Which replacement bulbs fit my pre-lit tree?

Compare the base of one of your bulbs with the photo on the listing, then match the voltage. Our multicolor and clear strands carry 100 bulbs each, rated at 2.5 volts. For Surelit trees there is a clear Surelit strand, listed for trees from 2016 and newer, and a 25-pack of multicolor Surelit bulbs. Unplug the lights before you change a bulb.

Do you sell replacement stands and eye bolts?

Yes. Our replacement stands cover trees from 3 ft to 12 ft, with hole sizes from 3/4 in. on the small plastic stands to 1 5/8 in. on the 12 ft metal stand. Each listing names the tree height it suits. For a metal stand that has lost a screw, the set of 3 replacement eye bolts is a standard size.

Can I use a replacement adapter outdoors?

Only if its listing says so. Some of our adapters are described as rain-tight or for outdoor use, and some list no outdoor rating at all, so read the listing for the exact model before you plug anything in outside. Follow the instructions supplied with your tree or decoration, and ask a qualified electrician if you are unsure.

Keep reading

Guides from the people who make the trees

All guides →